| |$0 | PB 8 727 | MOTOR ASSY, CRANKING | |
| 1 | 1211 395 H1 | BUSHING, CE FRAME | |
| 2 | 1211 396 H1 | ARMATURE, MOTOR | |
| 3 | 1211 397 H1 | COIL ASSY, FIELD | |
| 4 | 1211 269 H1 | STUD, TERMINAL | |
| 5 | 1211 283 H1 | BUSHING, LEVER HOUSING | |
| 6 | 1223 259 H1 | CLUTCH, POSITORK | |
| |$7 | 1228 448 H91 | HOUSING ASSY, DRIVE | |
| 7 | 1211 288 H1 | BUSHING, HOUSING | |
| 8 | 1211 277 H1 | PLUG, WICK | |
| 9 | 1302 333 H1 | WICK, FELT | |
| 10 | NSS | HOUSING, DRIVE | |
| |$12 | 1228 455 H1 | PLUG, UNUSED BOLT HOLE | |
| 11 | 347 360 R1 | O-RING | |
| |$14 | 1302 330 H1 | BOLT, MOUNTING - 5/16NCx1-1/2 | |
| |$15 | 1245 105 H1 | BOLT, MOUNTING - 5/16NCx7/8 | |
| 12 | 1211 399 H1 | BRUSH ASSY, MOTOR | |
| |$17 | 1211 292 H1 | SCREW, MOUNTING | |
| |$18 | 1211 401 H91 | PLATE ASSY, BRUSH | |
| 13 | 1211 400 H1 | HOLDER AND SPRING, BRUSH | |
| 14 | NSS | PLATE, BRUSH | |
| |$21 | 1211 279 H1 | SCREW, BRUSH PLATE | |
| 15 | 1211 290 H1 | PLUNGER, SOLENOID | |
| 16 | 1211 291 H1 | BOOT, PLUNGER | |
| 17 | 1210 073 H1 | SPRING, PLUNGER | |
| 18 | 1211 289 H1 | LEVER, SHIFT | |
| 19 | 1211 356 H1 | WASHER, SPACER | |
| 20 | 1211 286 H1 | WASHER, BRAKE | |
| 21 | 1211 402 H1 | WASHER, THRUST | |
| 22 | 1277 066 H1 | CABLE, TERMINAL | |
| 23 | 1211 267 H1 | NUT, TERMINAL STUD | |
| 24 | 19 839 R1 | NUT, ADJUSTING | |
| 25 | NSS | SHOE, POLE | |
| |$33 | 1245 108 H1 | SCREW, POLE SHOE | |
| 26 | 1211 265 H1 | WASHER, INSULATION | |
| 27 | 1211 266 H1 | WASHER, PLAIN | |
| |$$37 | |||
| |$37 | CONTINUED ON NEXT PAGE | ||
| 28 | 1211 280 H1 | WASHER, INSULATION | |
| 29 | 1210 070 H1 | WASHER, PLUNGER | |
| |$40 | 1211 281 H1 | PACKAGE, TERMINAL INSULATOR | |
| 30 | NSS | BUSHING, TERMINAL STUD | |
| 31 | NSS | INSULATOR, STUD | |
| |$43 | 1211 264 H1 | PACKAGE, TERMINAL BUSHING | |
| 32 | NSS | SUPPORT, INSULATOR | |
| 33 | NSS | WASHER, INSULATION | |
| 34 | 1211 151 H1 | GASKET, INSPECTION PLUG | |
| 35 | 1211 398 H1 | SOLENOID | |
| |$48 | 1302 329 H1 | SCREW AND WASHER | |
| 36 | 1211 271 H1 | INSULATOR, POLE SHOE | |
| 37 | 1302 331 H1 | O-RING | |
| 38 | 355 967 R1 | O-RING | |
| 39 | 352 219 R1 | O-RING | |
| 40 | 1210 066 H1 | PLUG, INSPECTION | |
| 41 | 1211 277 H1 | PLUG, WICK | |
| 42 | 1302 333 H1 | WICK, FELT | |
| 43 | 1210 074 H1 | RETAINER, SPRING | |
| 44 | 1210 072 H1 | RETAINER, SPRING | |
| 45 | 1211 285 H1 | SEAL, OIL | |
| 46 | 1211 152 H1 | SHAFT, SHIFT LEVER | |
| 47 | 213 262 R1 | RING, RETAINING | |
| 48 | 1211 276 H1 | WICK, FELT | |
| 49 | NSS | FRAME, CE | |
| |$63 | NSS | BOLT, MOUNTING | |
| 50 | 120 238 | NUT, TERMINAL STUD JAM - 1/2NC | |
| 51 | NSS | WASHER, LOCK | |
| 52 | NSS | INSULATOR, FIELD COIL | |
| 53 | NSS | HOUSING, ARMATURE | |
| 54 | NSS | HOUSING, LEVER | |
| |$69 | NSS | BOLT, MOUNTING | |
| 55 | 1211 292 H1 | SCREW, FIELD COIL ATTACHING | |
| 56 | 1302 332 H1 | CONNECTOR, TERMINAL TO SWITCH | |
| 57 | NSS | INSULATOR, BRUSH PLATE | |
| 58 | NSS | NUT, TERMINAL | |
| |$$75 | |||
| |$75 | CONTINUED ON NEXT PAGE | ||
| |$$77 | |||
| |$77 | F1 - PART NUMBER IS A NON-SERVICE PART AND IS LISTED FOR REFERENCE ONLY. | ||
| |$78 | THE FOLLOWING PART: | ||
| |$79 | LA 0 848 | MOTOR, CRANKING (SEE PG E6-022) | |
| |$$81 | |||
| |$81 | F2 - PACKAGE CONTAINS PARTS NOT REQUIRED FOR THIS CRANKING MOTOR. | ||
| |$$83 | |||
| |$$84 | |||
| |$84 | R1 - REMANUFACTURED ASSEMBLY AVAILABLE; REFER TO REMANUFACTURED | ||
| |$85 | ASSEMBLIES CATALOG. |
